
AP-N8A500
500W Network Mixer Amplifier
Categories:  
- 500W Network audio mixer Class D Amplifier
- Designed IP PA Amplifier for the small size multiple room application such as Warehouse, Hospital, School and Office
- Built-in Audio controller and...
- 500W Network audio mixer Class D Amplifier
- Designed IP PA Amplifier for the small size multiple room application such as Warehouse, Hospital, School and Office
- Built-in Audio controller and 500W Class D (constant voltage of 100V) amplification
- Multiple music programs could be matrix distributed from server to different zones
- Working with existing LAN/WAN network system, non-dedicated network system is needed
- Built-in 2 Line Color LCD Display
- Support LAN/WAN, Ethernet system, support over gateway and router
- Wide range of Network Protocol such as TCP,UDP,IGMP,ICMP,ARP
- Power up time is <1sec
- Separate volume and tone control for each 5 inputs
- VOX Priority override input at front panel MIC 1
- Output priority level can be defined from 5 sources, editable network program
- Third party system integration by 0V alarm output port
- Less emission of the heat and higher efficiency
- Automatic standby power-saving mode when no signal input
- 19” Ready rack mount Installation design
| General | |
| Rated Power Out | 500W |
| Audio Input | 3x MIC, 2x Aux, 1x Line In |
| Audio Output | 1x Line Out, 100V Line |
| Display Screen | LCD type 144x32 |
| Network Protocol | TCP,UDP,IGMP,ICMP,ARP |
| Network Port | RJ-45(10/100Mbps) |
| Audio Compression | ADPCM,MP3, MP2, PCM |
| Audio Bitrate & Sampling | 8kHz~44.1kHz, 16bit, 8kbps-320kbps |
| Audio Delay | <105 ms(millisecond) |
| S/N Ratio | ≥90dB, 20Hz-16KHz |
| Alarm | 1x 0V Alarm In, 1x 0V Alarm Out |
| Power Input | 200-240V AC or 110V AC, Fuse Protection |
| Power Consumption | <700W |
| Working Temp. & Humidity | -10 ℃ ~ 50 ℃, ≤ 90%RH (Not condensing) |
| Mount | 1U 19" Rack Mount, Table Top |
| Enclosure & Color | Full Metal, Black |
| Dimension & Weight | 44(H) x 483(W) x 408(D) mm, <16Kg |
