FAQs

Avtron DVR supports Universal signal acceptability by Pentabrid Technology. Pentabrid technology accepts the all Kinds of CCTV camera video signal such as HD-AHD, HD-CVI, HD-TVI, IP Camera, Analog.

Pentabrid HD DVR Options is  IP + HD Analog or IP + Analog or IP + HD/Analog mixed if DVR 4CH than 2CH IP + 2CH HD Analog/CVBS(Analog) if DVR 8CH than 4CH IP + 4CH HD Analog/CVBS(Analog) if DVR 16CH than 8CH IP + 8CH HD Analog/CVBS(Analog). Camera Resolution for HD resolution signal same as DVR supported resolution like 2.0MP/4.0MP/5.0MP IP resolution options are 1.0MP/1.3MP/2.0MP/3.0MP/5.0MP(depend on model).

Pentabrid DVR means it will support 5 types Video signal in Single DVR. Avtron HD Pentabrid DVR supported signal options is HD-AHD, HD-TVI, HD-CVI, IP, Analog(CVBS).

4 in 1 video out means this camera will support 4 types video output signal. HD-AHD or TVI  or CVI or Analog video output.

Yes, Avtron HD Cameras supports HD-TVI(Hikvision), HD-CVI(Dahua), HD-AHD(Samsung,Uniview) or any other brands HD-TVI and HD-CVI DVR. Cameras have options, just have to switch video signal from HD-AHD or HD-TVI or HD-CVI.

It is generally video signal types selection issue. Check the first DVR types if DVR is HD-TVI/CVI/AHD and supposed to your camera not converted as according to DVR types. Example: if your DVR is HD-TVI and your camera is in AHD or CVI Mode it will give B&W display on monitor screen or some time it even no display on DVR.

Video Out HDMI or VGA video resolution is not properly set, Try to change different video out like HD, Full HD. Some LED/LCD TV mismatch sharpness settings of OSD, Try to change OSD Sharpness settings or you can change sharpness setting from camera or DVRs. You can set the camera sharpness from Camera OSD fuction.

Avtron HD Cameras operates on DC 12V. Power consumption depends on LED types and QTY. Generally less than 250mA at 12V DC till 30M IR, 500mA at 12V DC till 50M IR Camera(*cable length and quality if not good this power consumption will vary).

OSD function benefits: First and foremost; OSD means On Screen Display Setting by which you can set many function. 1) Camera Brightness, contrast, Color, sharpness and many more picture enhancement setting. 2) Can be set WDR, BLC, HLC and other useful function. 3) Camera naming options in OSD(selected models). 4) All setting you can set from control room and each camera can be set as per environment.    AVTRON Cameras have dual options to operates OSD Function: 1) Built in Video Cable have OSD Switch/optional Connectors(*check and confirmed model list) 2) In current product range mostly model have Coax OSD control options from HD-DVR(*check and confirmed model list)

Darkwarrior starlight means the camera will support ultra low light illumination and it will give color image picture quality. Darkwarrior function available in Both series camera IP and HD Analog Camera. Darkwarrior series available with 0.002lux, 0.004lux and 0.0008lux based cameras.

IP PA system requires minimum 3 products. 1)  IP PA Speaker 2) IP Paging microphone 3) IP PA Software Optional Products for cost optimization 1) IP PA Encoder 2) IP PA Amplifier 3) IP PA Mini Amplifier 4) IP PA Decoder 5) IP PA Dual speaker  

The AVTRON IP-based public address system is a individual and common BGM and announcement system that includes IP speakers, IP paging microphones and software via announcements in any zones. The system operates on the IP LAN / WAN network protocol.

LMT means line matching transformer which provides equal power to each speaker.

M-DVRs are available in 4CH and 8CH Entry level to Professional series Models are available in below combination with/Without GPS, With GPS + 3G or 4G, With WiFi + GPS, With 4G or 3G + WiFi + GPS. Storage Options: With SD Card, With Dual SD Card, With HDD, With HDD + SD Card.

VDP range is available in 7″ Color Villa Kit and 4.3″ Color Villa Kit. Different options for the Outdoor Porch Station. With and Without Picture storage.